UCO^®FLOW CL

UCO^®FLOW CL is a concentrated disinfectant based on sodium hypochlorite.

UCO^®FLOW CL is specially formulated for use in the food industry (PT4), public areas (PT2), and for the disinfection of drinking water (PT5).

UCO^®FLOW CL contains 12.5% (w/w) of active sodium hypochlorite.

UCO^®FLOW CL possesses a broad spectrum of action and has proven bactericidal as well as fungicidal efficacy.

UCO^®FLOW CL holds approval number BE-REG-02663 and is suitable only for professional use

Surfaces should be disinfected after cleaning by spraying the product. UCO^®FLOW CL can also be used for CIP disinfection or disinfection by immersion. Rinse with potable water after the prescribed contact time.

Dosage:

• Surface Disinfection (Food Industry PT4 & Public Areas PT2):
  • For a bactericidal effect, apply a 0.33% solution with a 5-minute contact time.
  • For a fungicidal effect, apply a 0.66% solution with a 5-minute contact time.
• CIP Disinfection and Immersion (Food Industry PT4):
  • To achieve a bactericidal effect, a 0.06% concentration is needed with a 5-minute contact time.
  • For a fungicidal effect, you have two options: use a 0.29% concentration for 15 minutes, or use a higher 1.45% concentration for a shorter 5-minute contact time.
• Disinfection of Drinking Water (PT5):
  • The product should be dosed in such a way that the final concentration of residual chlorine in the water is maintained between 1 and 10 mg/L.

Never mix with acids or ammonia. Risk of toxic chlorine gas formation.

Do not use on aluminium, zinc, copper, or brass. Risk of corrosion.

Always test the product’s compatibility on a small, inconspicuous area before full application.

Always consult the Safety Data Sheet for this product before use.

Store in a frost-free area and avoid exposing the product to heat and direct sunlight (UV).

Keep packaging closed when not in use.

Dispose of empty containers according to local or national guidelines.